- All Products
- CINTA D/C VHB ACRÍLICA (1mm) MANDRIL DE 1'' (7)
CINTA D/C VHB ACRÍLICA (1mm) MANDRIL DE 1'' (7)
https://www.atyt.es/shop/cinta-d-c-vhb-acrilica-1mm-mandril-de-1-7-1527 https://www.atyt.es/web/image/product.template/1527/image_1920?unique=431fcf3| Width: 19 mm |
| Thickness: 1 mm |
| Support color: Transparent |
| Liner color: Red |
| Adhesive type: Acrylic |
Share:
STORAGE CONDITIONS
For better preservation of its properties, the product should be stored in its original packaging at a temperature between 20 and 30ºC, protected from direct sunlight and moisture. It is recommended to use the product within 24 months after receipt.
GENERAL WARRANTY CONDITIONS
ATyT recommends that the contact surfaces be clean of grease, oil, dust or any other non-stick substance.
The technical data contained in this product specification is intended to guide the end user and does not imply a legal guarantee regarding certain properties, due to the numerous influences that may occur during the handling and use of the product.
Before use, the consumer must evaluate the suitability of the product for its specific purpose and will assume all risk and responsibility in relation to such use.
| ADHESIVE PROPERTIES | VALUES | METHOD |
|---|---|---|
| Total thickness | 1,0 mm | ASTM D-3652 |
| Adhesion to steel (Internal face) | 18,4 N/cm | ASTM D-3330 |
| Adhesion to steel (External face) | 16,4 N/cm | ASTM D-3330 |
| Elongation at break | ≥ 10 % | ASTM D-3759 |
| Dynamic shear resistance |
≥ 34,3 N/cm² (20 min) ≥ 49 N/cm² (24 h) |
ASTM D-3330 ASTM D-3330 |
| Service temperature range |
[-20ºC – +160ºC] [-20ºC – +100ºC] |
INTERNAL (1h cycles) INTERNAL (8h cycles) |
A: External diameter (mm)
B: Inside diameter (mm)
C: Broad (mm)
D: Length (m)
| A | 60 mm | 67 mm | 120 mm | 230 mm |
| B | 20 mm, 76 mm | |||
| C | 9 mm | 12 mm | 15 mm | 19 mm |
| D | 1,5 m | 2,5 m | 10 m | 33 m |
Select Your Country
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
