- All Products
- VELCRO CON ADHESIVO [MACHO] (8)
![VELCRO CON ADHESIVO [MACHO] (8)](/web/image/product.product/38176/image_1024/%5BS-VELC70%25NYLLB-8-R2550C-BL-HOOK-G%5D%20VELCRO%20CON%20ADHESIVO%20%5BMACHO%5D%20%288%29%20%2850%20mm%2C%20White%29?unique=9d3548e)
VELCRO CON ADHESIVO [MACHO] (8)
https://www.atyt.es/shop/velcro-con-adhesivo-macho-8-1129 https://www.atyt.es/web/image/product.template/1129/image_1920?unique=2fe01fd| Length: 25 m |
| Liner color: White |
| Adhesive type: Solvent |
| Packaging type: Bulk |
| Composition: 70% Nylon |
Share:
STORAGE CONDITIONS
For better preservation of its properties, the product should be stored in its original packaging at a temperature between 20 and 30ºC, protected from direct sunlight and moisture. It is recommended to use the product within 24 months after receipt.
GENERAL WARRANTY CONDITIONS
ATyT recommends that the contact surfaces be clean of grease, oil, dust or any other non-stick substance.
The technical data contained in this product specification is intended to guide the end user and does not imply a legal guarantee regarding certain properties, due to the numerous influences that may occur during the handling and use of the product.
Before use, the consumer must evaluate the suitability of the product for its specific purpose and will assume all risk and responsibility in relation to such use.
| ADHESIVE PROPERTIES | VALUES | METHOD |
|---|---|---|
| Thickness | 1,7 – 2,05 mm | INTERNAL |
| Weight | 300 g/m2 | INTERNAL |
|
Pelage force (velcro) Original Échantillon > 1000 cycles of production and fermentation |
3,50 N/cm 0,98 N/cm |
ASTM D-5170 |
|
Shear resistance (Velcro) Original Sample > 1000 opening and closing cycles |
10,6 N/cm2 3,8 N/cm2 |
ASTM D-5169 |
|
Dimensional stability in the wash Original Sample Less than 1 sink Contraction level |
35 cm (♂) / 34,7 cm (♀) 34,9 cm (♂) / 34,6 cm (♀) -0,3 % (♂) / -0,3 % (♀) |
EN ISO 5077 EN ISO 3759 EN ISO 6330 |
|
Dimensional stability upon drying Original Sample After 1 drying Shrinkage level |
34,9 cm (♂) / 33,9 cm (♀) 34,8 cm (♂) / 34,0 cm (♀) -2,9 % (♂) / -2,6 % (♀) |
EN ISO 3759 EN ISO 3175 |
|
Adhesion to steel |
1,5 N/cm | ASTM D-3330 |
| Shear (adhesive) strength | 7,5 N/cm | ASTM D-3330 |
| Softening temperature | 180 ºC | INTERNAL |
| Melting temperature | 215 ºC | INTERNAL |
A: External diameter (mm)
B: Inside diameter (mm)
C: Broad (mm)
D: Length (m)
| A | 8 mm | 162 mm | ||
| B | 40 mm | |||
| C | 20 mm | 50 mm, 100 mm | ||
| D | 1 m | 25 m | ||
Select Your Country
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
